Slot Samplers and Pocket Samplers

For target-, multilayer-, and average sampling

Acc. to DIN 53242

These samplers allow simultaneous sampling of different depths of the bulk material. Pocket or zone samplers may be used either vertically or horizontically

(A) Target sample:

The sample is withdrawn from a specific depth in the bulk and can accurately be assigned to this depth.

(B) Multilayer-sample:

Diverse Target samples are withdrawn simultaneously from different depths in the bulk. Each of the samples can accurately be assigned to its specific depth.

(C) Average (cross-sectional) sample

A single sample is withdrawn that represents the whole depth. This results in a sample that represents an average at the specific spot

Applications:

Generally zone samplers are suitable for all kinds of bulk, that are within the specification regarding particle size and flow behaviour. They can be used as well horizontally and vertically in a wide range of containers. Please refer to the description for details.
For the choice of the adequate sampler please consider its material, the kind of the bulk and the kind of analysis. The material must not influence the result in any way. Abrasive bulk can -construction-conditioned- cause problems (stuck of sampler)

Operation:

Two tubes can be twisted to open and close the collecting chambers.

The zone sampler is inserted in closed condition into the bulk. By turning the inner tube the chambers are opened and the sample is collected. For bulk that is not free-flowing (cohesive) we recommend the zone sampler with scraping edge.

How does a Slot Sampler work (average sampling)?

Please click here to learn about the operation!

Slot Sampler "Maximus" for average sampling ALU

For coarse grained bulk with a maximum particle size up to 20mm. Emptying through the end.
Made from aluminium, different lengths, diameter 50mm, high sample size.

Slot Sampler "ECO" for average sampling ALU

Economic device made of aluminium for average sampling. Emptying through the end.

5 zones. Length 1500 mm. Maximum particle size: 6 mm.

Stainless steel Slot Sampler for average samples

Approved Sampler for the withdraw of average samples from all kinds of bulk and powders with a maximum particle size of 6 mm. Emptying through the end.

3, 4 or 5 slots depending on length.

Made of polished high grade stainless steel AISI 316, different lengths, diameter 25 mm.

Pocket Sampler "Multi-Layer"

Very popular device that is collecting single samples from different depths. The single samples can be analysed separately.

Inner part either made from inert PTFE (Teflon) or stainless steel AISI 316. Diameter 25 mm.

The sampler is emptied by emptying the separate chambers. The best solution for this is the Emptying Rack (please see description below).

Suitable for bulk with a maximum particle size of 6 mm.
Available lengths: 550, 850 and 1500 mm.

Emptying Rack for Pocket Samplers

To empty pocket samplers, the Emptying Rack is the perfect solution:

Enables the samples to be deposited directly into collecting bottles
All stainless steel construction
Supplied complete with stainless steel funnels

Scrape Sampler stainless steel

The scraping edge makes the even cohesive bulk entering the chamber.
Made from stainless steel 304
Two sizes available:
Length 1000mm d=25mm.
Length 1500mm d=50mm.

Powder Trier

High Quality Slot Sampler with cutting scroll. For further information please visit our product page Powder Trier.

Order information

Art. No.	Description	Zones/-Volume (ml)
303.055	Pocket Sampler "Multilayer", stainless steel, L = 550 mm, with separate pockets	3 / 15 ml each pocket
303.085	Pocket Sampler "Multilayer", stainless steel, L = 850 mm, with separate pockets	3 / 17 ml each pocket
303.150	Pocket Sampler "Multilayer", stainless steel, L = 1500 mm, with separate pockets	5 / 20 ml each pocket
302.055	Pocket Sampler "Multilayer", stainless steel / with Teflon core, L = 550 mm, with separate pockets	3 / 15 ml each pocket
302.085	Pocket Sampler "Multilayer", stainless steel / with Teflon core, L = 850 mm, with separate pockets , with separate pockets	3 / 17 ml each pocket
302.150	Pocket Sampler "Multilayer", stainless steel / with Teflon core, L = 1500 mm, with separate pockets	5 / 20 ml each pocket
288.25-60	Cleaning brush Ø 25 mm, L = 600 mm (stainless steel)
289.055	Emptying rack for 550 mm Pocket Samplers (302.xxx and 303.xxx), 3 zones
289.085	Emptying rack for 850 mm Pocket Samplers (302.xxx and 303.xxx), 3 zones
289.150	Emptying rack for 1500 mm Pocket Samplers (302.xxx and 303.xxx), 5 zones
301.085	Slot Sampler MAXIMUS (aluminium), 850 mm	3 / 800 ml in total
301.150	Slot Sampler MAXIMUS (aluminium), 1500 mm	5 / 1700 ml in total
300.085	Slot Sampler ECO (aluminium), 850 mm	3 / 130 ml in total
300.150	Slot Sampler ECO (aluminium), 1500 mm	5 / 280 ml in total
304.055	Slot Sampler Stainless Steel for average sampling, 600 mm	3 / 110 ml in total
304.100	Slot Sampler Stainless Steel for average sampling, 1000 mm	4 / 190 ml in total
304.150	Slot Sampler Stainless Steel for average sampling, 1500 mm	5 / 300 ml in total
290.100	Scrape Sampler (stainless steel), 1000 mm	1 / 200 ml in total
290.150	Scrape Sampler (stainless steel), 1500 mm	1 / 1500 ml in total
288.25-60	Cleaning brush Ø 25 mm, L = 600 mm (stainless steel)
288.50-60	Cleaning brush Ø 50 mm, L = 600 mm (stainless steel)

Diese Website bei linksilo.de bookmarken

Search & Find